User`s guide

Control Strategy Configuration
Tag Order
Release E UMC800 Control Builder User’s Guide 115
1/01
Tag Order
Introduction
Each time you configure a Loop (PID, CARB, ONOFF, TPSC, or AMB), SP Programmer (SPP), SP
Scheduler (SPS), Hands/Off/Auto Switch (HOA), or a Device Control (DC) function block, you will have
assigned a unique Tag Name to the block. The example shows a PID Function block.
Loop Tag Name
Assigned
This selection lets you arrange up to 16 Tags to determine the tag order in various displays on the operator
interface. The order in which they appear in this box can be changed to coincide with the order in which
you want them to be displayed.
Configuring the display tag order
Follow the procedure in Figure 25 to access a particular tag order group and arrange the order, in which
you want them displayed, in the “Tag Order” dialog box.
Click and hold
on any Tag on
the list and move it (e.g., drag it)
ahead or back in the order. You
can re-arrange the tag order to
suit your display requirements.
The “Tag Order”
dialog box will appear.
From the
“Configure” menu,
select “Tag Order”
From the
“Tag Order” submenu,
make selection
Figure 25 Configuring the tag order
To assign Tags to Display Buttons, refer to OI Display Buttons (1-8) Configuration (page 126).