User`s guide

Control Strategy Configuration
How to Configure Display Tag Groups
Release E UMC800 Control Builder User’s Guide 113
1/01
Multi-point panel display tag groups
Description
Multi-Point Panel displays present the current value/state for up to seven Analog or Digital signal tags in
the controller. This selection lets you configure 4 groups of Multi-Point Panel Displays. Each group may
contain a mix of analog signal tags, digital signal tags, analog variables, and digital variables.
After you have completed all the group configurations you can select the groups and formats to be
displayed and assign them to a specific operator panel display button. [Refer to O/I Display Buttons (1-8)
Configuration (page 126).]
Configuration procedure
Follow the procedure in Figure 24 to configure the “Multi-Point Panel” Display Tags Group.
1. Select the “Multi-Point” tab
3. Enter the Group Title.
(any mix of numbers letters and spaces)
6.
To ADD a tag,
see Note 1
To INSERT a tag,
see Note 2
Note 1 To Add a signal tag:
Click on ADD. The selected Signal tag or
variable will be placed in the next available
position in the “Selected Tags” field.
Note 2 To Insert a signal/variable tag:
Select a position in the “Selected Tags” field, then click on
INSERT. The selected Signal tag or variable will be placed
in the position chosen, and other signal tags will move down
as required. You may only insert to the occupied portion of
the list. An attempt to insert to any empty box will place the
new item in the first empty box.
7. The selected Signal Tag name
will be placed in the “Selected Tag”
field.
2. Select a group from
the drop-down menu
8.Repeat selection for up to 7 tag
names for each group
To delete a selected tag name,
click on the position of the tag
name, then click “Delete” bar.
After all tag names are selected
and positioned, click “OK”.
5.Select a signal in the signal tag list
4. Select which signals you want
displayed in the “Selected Tags” field.
Select the types of signals to be
displayed from the drop down menu.
Figure 24 Multi-point panel display tag group configuration procedure
See the following example of a Multi-Point Panel Group Display.