User`s guide
Control Strategy Configuration
How to Configure Display Tag Groups
Release E UMC800 Control Builder User’s Guide 107
1/01
Bar display tag groups
Description
Bar Graph displays provide graphic representation of multiple analog or digital signal tags using horizontal
or vertical orientation. Bar Graph displays are available in 3-point or 6-point vertical or horizontal format.
This selection lets you configure 4 groups of Bar Displays. Each group may contain a mix of analog signal
tags and digital signal tags.
After you have completed all the group configurations you can select the groups to be displayed and assign
them to a specific operator panel display button. [Refer to O/I Display Buttons (1-8) Configuration (page
126).]
Configuration procedure
Follow the procedure in Figure 21 configure the “Bar” Display Tags Group.
1. Select the “Bar” tab
4. Select which signals you want
displayed in the “Selected Tags” list
Select the types of signals to be
displayed from the drop-down menu.
3. Enter the Group Title.
(any mix of numbers letters and spaces)
6.
To ADD a tag,
see Note 1
To INSERT a tag,
see Note 2
Note 1 To Add a signal tag:
Click on ADD. The selected Signal tag or
variable will be placed in the next available
position in the “Selected Tags” field.
Note 2 To Insert a signal/variable tag:
Select a position in the “Selected Tags” field, then click on
INSERT. The selected Signal tag or variable will be placed
in the position chosen, and other signal tags will move down
as required. You may only insert to the occupied portion of
the list. An attempt to insert to any empty box will place the
new item in the first empty box.
7. The selected Signal Tag
will be placed in the
“Selected Tag Signal” field
2. Select a group from
the drop-down menu
9.Repeat selection for up to 6
tags for each group
To delete a selected tag, click on
the position of the tag, then click
“Delete” bar.
After all tags are selected and
positioned, click “OK”.
5.Select a signal in the signal tag list
8. Enter the “Scale Low” and
“Scale High” values for each
signal selected.
Figure 21 Bar display tag group configuration procedure
See the following example of a Bar Group Display.