User`s guide

Control Strategy Configuration
How to Configure Display Tag Groups
Release E UMC800 Control Builder User’s Guide 103
1/01
Panel meter display tag groups
Description
This selection lets you configure 10 groups of Panel Meter Displays. Each group may contain a mix of
analog signal tags, digital signal tags, analog variables, and digital variables.
After you have completed all the group configurations you can select the groups and formats to be
displayed and assign them to a specific operator panel display button. [Refer to O/I Display Buttons (1-8)
Configuration (page 126).]
Configuration procedure
Follow the procedure in Figure 19 configure the “Panel Meter” Display Tags Group.
1. Select the “Panel Meter” tab
2. Select a group from
the drop-down menu
4. Select which tags you want
displayed in the “Selected Tags” list
Select the types of signals to be
displayed from the drop-down menu.
3. Enter the Group Title.
(any mix of numbers letters
and spaces)
6.
To ADD a tag,
see Note 1
To INSERT a tag,
see Note 2
Note 1 To Add a signal tag:
Click on ADD. The selected Signal tag or
variable will be placed in the next available
position in the “Selected Tags” field.
Note 2 To Insert a signal/variable tag:
Select a position in the “Selected Tags” field, then click on
INSERT. The selected Signal tag or variable will be placed
in the position chosen, and other signal tags will move down
as required. You may only insert to the occupied portion of
the list. An attempt to insert to any empty box will place the
new item in the first empty box.
7. The selected Tag Name will be
placed in the “Selected Tag” field
Repeat selection for up to 12 tags
for each group
To delete a selected tag, click on
the position of the tag, then click
“Delete” bar.
After all tags are selected and
positioned, click “OK”.
5.Select a signal in the signal tag list
Figure 19 Panel meter display tag group configuration procedure
See the following example of a Panel Meter Group Display.