User`s guide

Control Strategy Configuration
How to Configure Display Tag Groups
100 UMC800 Control Builder User’s Guide Release E
1/01
How to Configure Display Tag Groups
Overview
Introduction
The “Display Tag Groups” let you configure groups of tags that can be accessed by the operator interface
using a standard set of display formats and a predefined menu hierarchy. These groups are configured using
tabs that appear on the “Display Tag Groups Configuration” dialog box. The groups are:
• Alarm
• Panel Meter
• Trend
• Bar
• Overview
• Single-Point
• Multi-Point
Accessing the display tag groups
Follow the procedure in Figure 17 to access the “Display Tag Group Configuration” dialog box.
Select a Tab for
Configuration.
Select “Display Tag
Groups” from the
“Configure” menu.
The “Display Tag
Group Configuration”
dialog box will appear.
Figure 17 Accessing the display tag groups