User`s guide

Control Strategy Configuration
How to Enter a Text String
94 UMC800 Control Builder User’s Guide Release E
1/01
How to Enter a Text String
Introduction
You have the option to enter descriptive data on the Function Block Diagram. Any entered data has no
effect on the operation of the Controller.
Entering a text string
Follow the procedure below to annotate the Function Block Diagram.
Step Action
1
From the Library Tree group “Other Items”, use the left Mouse button to click on the T (text)
symbol, hold the button down, drag the symbol to the function block diagram and release the
mouse button. The “Modify Text” dialog box will appear on the Function Block Diagram.
2
Key in the desired text in the field, then click O.K. The text will appear on the diagram in a
dotted-line box.
NOTE: The text string is limited to 80 characters. Multiple text strings may be positioned one
below the other for complete user description.
3
Click and hold the cursor in the box and move the text string to the desired location.
4
To enter another text string, repeat the above steps.
Editing text
To edit existing text, double click the text. The “Modify Text” dialog box will reopen. You can cut and
paste text from one “Modify Text” dialog box to another. Use the ‘right’ mouse button menu while the
mouse cursor is in the edit box.