User`s manual

BL4S100 User’s Manual 111
6.3 Dynamic C Function Calls
Function calls for use with the XBee RF modules are in the Dynamic C LIB\Rabbit4000\
XBee\XBEE_API.LIB library. These ZigBee specific function calls are described in An
Introduction to ZigBee, which is included in the online documentation set.
6.4 Where Do I Go From Here?
NOTE: If you purchased your BL4S100/BL4S150 through a distributor or through a
Rabbit partner, contact the distributor or partner first for technical support.
If there are any problems at this point:
• Use the Dynamic C Help menu to get further assistance with Dynamic C.
• Check the Rabbit Technical Bulletin Board and forums at www.rabbit.com/support/bb/
and at www.rabbit.com/forums/.
• Use the Technical Support e-mail form at www.rabbit.com/support/.
If the sample programs ran fine, you are now ready to go on.
An Introduction to ZigBee provides background information on the ZigBee protocol, and
is available on the CD and on our Web site.
Digi’s XBee™ Series 2 OEM RF Modules provides complete information for the XBee
RF module used on the BL4S100/BL4S150, provides background information on the
ZigBee PRO protocol, and is available at ftp1.digi.com/support/documentation/
90000976_a.pdf.