User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Details Action
PAPER
JAM>TRAY
The beeper sounds five times. All
communication channels are set to BUSY.
The error is written to the Error Log. The
present job is held until the jam is cleared,
then jammed pages are reprinted.
Refer to "Clearing Paper Jams" in
Chapter 4.
Processing... The printer has received a print job and
is printing it.
None.
Resetting... Print jobs or the current fax is being
flushed.
None.
Restoring
Factory Defaults
The printer restores the defaults as
originally shipped from the factory. This
message displays when the Online and
Menu keys are pressed during power-up.
None.
Self-test The printer is performing a self-testing
process during power-up.
None.
TONER LOW The printer is ready but only a few more
prints can be made after this message
first appears.
Prepare to replace the print cartridge.
TRAY EMPTY The beeper sounds five times. All
communication channels are set to BUSY.
Printing halts until paper is loaded.
Load paper in the requested paper tray.
TRAY OUT The beeper sounds five times. All
communication channels are set to BUSY.
Printing halts until tray is replaced.
Install appropriate paper tray.
UPPER TRAY
EMPTY
The beeper sounds five times. All
communication channels are set to BUSY.
Printing halts until paper is loaded.
Load paper in the requested paper tray.
UPPER TRAY
OUT
The beeper sounds five times. All
communication channels are set to BUSY.
Printing halts until tray is replaced.
Install appropriate paper tray.
Waiting... The printer is waiting for communication
from the host computer.
None, unless data remains after a print
job has been sent, but not all of the pages
printed. Refer to “Last Page Is Not
Printed” in Chapter 3.
Warming Up... This message appears when the printer
is waiting for the fuser to warm up.
Typically, this is seen at power-up and
when returning from Energy Saver mode.
None.
5-8 Diagnostics and Troubleshooting