User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the
Multipurpose Feeder
1. Open the feeder door and attach the Multipurpose Feeder, if
you have not already done so.
2. Move the adjustable feed guides to the size of the paper.
3. Place your paper print side down, short edge first, on the tray
(statement-size paper is fed long edge first). The paper
should be between and touching the feed guides, and
underneath the inside tabs.
When the Print Job
is Finished
If you used the control panel to select the Multipurpose Feeder
and paper size, use the control panel to reset the tray and paper
size selections to their original settings. Turn the printer off (
O),
then on (
l) to establish the change in default.
Printing 3-11