User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sending a
Print Job
1. Before you begin to print, be sure that the interface cable
between the host computer and the printer is properly
connected.
2. Select a printer driver within your software application. The
printer driver determines which printer language (PostScript
page description language or PCL 5 command set) your
application software sends to the printer. Be sure the selected
driver supports PostScript or PCL 5 print language before
sending a job.
Refer to your application documentation for information on
selecting printer drivers.
3. To dedicate a communications port to receive a specific
printer language, refer to Chapter 2, "Using the Control
Panel."
4. Print your document. Refer to the manual provided with your
software application or host operating system for specific
printing instructions.
3-8 Printing