User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PCL 5 Mode
Resident Fonts
The standard fonts shown below are supported by the printer
when in PCL 5 comand mode. The Font Report lists (under
the ROM Resident Fonts heading) the families of fonts that
are resident in the printer and available through the PCL 5
command set.
Scalable fonts:
Times: Medium, Bold, Italic, Bold Italic
Univers: Medium, Bold, Italic, Bold Italic
Univers Condensed: Medium, Bold, Italic, Bold Italic
ZapfDingbats: Medium
Bit-mapped fonts:
Courier 10 pitch 12 point: Italic, Bold, Medium
Courier 12 pitch 10 point: Italic, Bold, Medium
LinePrinter 16.66 pitch 8.5 point: Medium
Downloaded Fonts Downloaded fonts are stored on the host computer and can be
copied to the printer when you are ready to print. These fonts
are not permanent. When you turn the printer off, the memory
used to store the downloaded fonts is erased.
Copy the fonts to the printer by following the downloading
instructions included with the font diskette. Print a Font Report.
Any PostScript and TrueType fonts that have been downloaded
to the printer from your computer are listed by font name in the
RAM Resident column, and if installed, the Programmable Font
Module column.
You can permanently store PostScript, TrueType, and bit-
mapped PCL downloaded fonts to the Programmable Font
Module if this option is installed.
3-6 Printing