User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Energy Saver This menu item allows you to set the length of time the printer

waits before reducing power consumption after completion of

the last print job. The default is 30 minutes.

Panel Security This item allows you to set a security code to lock the printer

control panel and prevent configuration changes by unauthorized

personnel. Scrolling through the selections and printing reports

and menu maps is still available.

Until the correct key sequence is entered and the printer control

panel unlocked, any attempt to make changes results in

*Panel

Locked*

momentarily displaying on the control panel. As each

key is pressed, an * (asterisk) displays on the second line of the

control panel. If an incorrect code is entered,

*Incorrect Code*

displays.

You can also restore the factory defaults to unlock the printer;

however, all other original settings are also restored. Use this

option only if you want to restore all factory defaults. To restore

factory defaults, press and hold Online and Menu while turning

on the printer.

To enable or disable panel security, press the following keys in

the order below:

Value

Select

Using the Control Panel 2-33