User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Paper Select Wait This menu item sets the length of time that the printer waits after
displaying
LOAD <paper size>. You can insert the requested
paper size, or press the Select key, which causes the job to print
on the paper from the default tray. If you do neither, the job
prints on the default paper when the Paper Select Wait times out.
This is applicable for both PostScript and PCL jobs.
Manual Feed Wait The printer driver allows you to select a Manual Feed Tray
option from your software application as your print job
destination. The printer displays
MANUAL <paper size> when a
job is sent and Manual Feed Tray is selected for the print job.
This is useful if you want to manually feed paper through the
Multipurpose Feeder. For example: The printer is in another
room and you want to print your job on special paper without
disruption by another print job. Send your print job to the
"Manual Feed Tray." The printer waits the number of seconds
designated by Manual Feed Wait. Install the requested paper in
the Multipurpose Feeder and press Select for each
MANUAL<paper size> message. If the Select key is not pressed
within the time limit set for this timeout, the printer flushes the
job and continues with normal operations.
AppleTalk Wait This menu item allows you to set the amount of time (in
seconds) before printing the last page of a print job if a Ctl-D is
not seen on the optional AppleTalk interface.
2-30 Using the Control Panel