User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resets
This menu selection flushes jobs that are currently printing or,
in some cases, are in the print buffer.
NOTE: Reset choices for options like the Ethernet board only
appear if the optional board is installed.
Reset Printer - flushes the current job and any print jobs in
the parallel and serial buffer. The message display indicates
the reset is being performed.
Reset Ethernet - flushes the current job and any jobs in the
Ethernet print buffer.
Reset Fax - flushes the current fax job and any fax jobs in the
fax buffer.
Time-Outs
This menu item allows you to set the length of time (in seconds)
that the printer waits after receiving the last byte of data before
continuing to process a job or ending a job.
PostScript Wait If the printer does not see a Ctl-D (end of file) in a PostScript
file and there is no more data in the buffer, it waits before
returning to idle. The PostScript Wait menu item allows you
to set the length of time the printer waits. The default is 40
seconds. You may want to increase the wait time if some of
your jobs are not printing.
PCL Wait If the printer does not see the end of a PCL file, and there is no
more data in the buffer, it waits before returning to idle, or in
some cases it waits before printing the last page of a job. The
PCL Wait menu item allows you to set the length of time the
printer waits. The default is 30 seconds. You may want to
increase the wait time if some of your jobs are not printing.
Using the Control Panel 2-29