User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fax (optional)
This group contains all of the selectable items pertaining to the
fax interface. Options include the following:
Enable Interface - The fax system can be enabled to send and
receive (default), to send only, to receive only, or to be
completely disabled. When disabled, the Fax Modem board
is completely nonoperational and does not answer incoming
phone calls or accept Fax Modem jobs sent from the printer.
Retry Count** - This option sets the number of times
(*0 through 99) a call is attempted (redialed) after the first
failure.
Retry Interval** - This option sets the time interval
(1...*5...60 minutes) between redials and is measured
in minutes.
Resolution** - This menu item allows the user to set the
resolution of the fax to be sent as Standard or *Fine.
Speaker Enable** - This menu item allows you to enable or
disable the speaker when sending a fax.
Header Enable** - This option determines if the page header,
which contains the date and time of the fax, is printed at the
top of the page (*On) or not at all (Off).
** These items only appear if either Send & Receive or Send
Only is selected as the default for Enable Interface.
2-26 Using the Control Panel