User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Laser Printer
Safety
Information
The following safety guidelines and information are provided to
protect and inform you and ensure proper and safe operation of
the printer.
Do not modify or remove parts from the printer.
Do not block the air vent with paper or another object. If the
printer is used in a small room for many hours, be sure adequate
ventilation is provided.
Do not place anything on the printer. Liquid spilled on the printer
could affect insulation, and may cause a hazardous situation.
Do not allow metal objects (such as paper clips or staples) to fall
into the printer.
Do not open the printer cover during operation. This could cause a
paper jam.
Do not turn the power off while the printer is printing.
Do not spray flammable substances near the printer.
If the printer does not operate normally when the instructions are
followed, or if the printer exhibits a distinct change in
performance indicating a need for service, unplug the printer from
the electrical outlet. Contact your Authorized Digital Reseller or
Service Provider.
Do not handle equipment if your hands are wet. In a
nonemergency situation, if you must unplug the printer, turn the
power off first. Then disconnect the power plug from the electrical
outlet by pulling on the plug, not the power cord.
Do not deviate from the specifications outlined in this guide.
Be sure the power switch is off before inserting the power plug
into an electrical outlet.
The printer complies with appropriate safety standards. With specific
regard to the laser, this equipment complies with laser product
performance standards set by governmental agencies as a Class 1 laser
product. It does not emit hazardous light; the beam is totally enclosed
during all modes of customer operation and maintenance.
v