User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transparencies The following table summarizes specifications to consider when
selecting transparencies.
Table E-2
Transparency Specifications
Properties Specifications
Thickness 0.110 mm 3.9 to 4.5 mils
Cutting Dimension
Tolerance
+/- 0.7 mm 0.031 inch
Cutting Angle 90° +/- 0.2°
Paper Specifications Some types of paper may not perform well or may damage your
printer. The following paper should not be used:
Paper that does not meet the weight specifications given in
Table E-3
Extremely smooth, shiny, or highly-textured paper
Paper with high rag content
Coated paper
Letterhead or preprinted paper using low temperature dyes or
thermography
Paper that is damaged, wrinkled, or has irregularities like
tabs, staples, etc.
Multiple forms or carbonless paper
Follow the specifications outlined in Table E-3 when selecting
paper. It is always a good idea to test paper in your environment
before purchasing large quantities.
E-6 Paper Facts