User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Label Curl
Labels must lie flat with no more than .50 inch (12.7 mm) of
curl in any direction.
Poorly Manufactured Labels
Labels that show any indication of delamination, such as
wrinkles or bubbles, should not be used. Follow the paper
specifications outlined in Table E-1 when selecting label stock.
Table E-1
Label Specifications
Label Properties Specifications
Face Sheet Must meet specifications in Table E-3.
Fusing Compatibility All adhesives, liners, facestocks and other
materials used in label construction must
be compatible with the heat and pressure
of the fusing process. Materials must not
discolor, melt, offset material or release
hazardous emissions when heated to 392°
F (200° C) for 0.1 seconds.
Construction Total construction caliper must not exceed
0.0070 inches (0.18 millimeters).
Label Usage Hints Store the label stock 72 hours in the printing environment
before using in the printer.
Leave the labels sealed in the plastic wrapping until loaded
into the printer.
Do not fan the label sheets unless the package label instructs
you to do so.
Paper Facts E-5