User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preprinted Forms Notify your supplier that the preprinted form is used with a laser
printer. Forms must be printed with heat-resistant inks that will
not melt, vaporize, or release hazardous emissions when subject
to the fusing temperature of 392º Fahrenheit (200º Centigrade)
for 0.1 second. Make sure the ink is completely dry before
using the forms to prevent the ink from transferring to the printer
rollers and contaminating internal printer mechanisms.
Labels An adhesive label is paper with a pressure-sensitive adhesive
backing. The three parts of label stock are:
Top or face sheet - The top sheet is the surface that the image is
printed on. It is usually composed of photocopy paper.
Carrier or Backing Sheet - The backing sheet should be
bleached sulfate stock and silicone-coated for easy release of the
face sheet.
Adhesive - The adhesive should be stable at the 392º F (200º C)
temperatures encountered in the fusing process and must not
give off any emissions that exceed exposure levels or threshold
limits established by regional or national safety agencies.
Adhesive should not come in direct contact with any part of the
printer because it may stick to the print drum or rollers, causing
toner offset or paper jams. No adhesive should be exposed
between the labels.
Paper Facts E-3