User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connector Pin
Assignments
Pin Signal Name Source Function
1 STROBE* Host Causes PD 0-7 to be loaded into the printer
2 PD 0 Host Parallel Data Bit 0
3 PD 1 Host Parallel Data Bit 1
4 PD 2 Host Parallel Data Bit 2
5 PD 3 Host Parallel Data Bit 3
6 PD 4 Host Parallel Data Bit 4
7 PD 5 Host Parallel Data Bit 5
8 PD 6 Host Parallel Data Bit 6
9 PD 7 Host Parallel Data Bit 7
10 ACK* Printer Acknowledgement of data received by printer
11 BUSY Printer Printer not ready to receive data
12 PE Printer Paper error
13 SLCT Printer Printer is selected and online
14 AUTOFD* Host Instructs printer to auto feed 1 line of paper
after a Carriage Return
15 No connection
16 GND Signal Ground
17 Frame Frame Ground
18 No connection
19-30 GND Signal Ground
31 INIT* Host Initializes printer and clears print buffer
32 ERROR* Printer Indicates a printer error condition
33 No connection
34 No connection
35 No connection
36 SLCTIN* Host Selects printer or host and enables to accept data
*Signal is active low
D-2 Parallel Interface Support