User`s guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. The attachment plug must be an earth-grounding type with
a NEMA 5-15P (15A, 125V) or NEMA 6-15P (15A, 250V)
configuration.
Japan 1. The cord must be MITI approved.
2. The flexible cord must be a VCT or VCT F 3-conductor cord
with a minimum conductor size of 1.50 square millimeters.
3. The cord must have a rated current capacity of 12A.
4. The attachment plug must be an earth-grounding type
JIS 8303 (15A, 125V) configuration.
Other Countries 1. The cord fittings must bear the certification mark of the
agency responsible for evaluation in a specific country.
Acceptable agencies include:
BSI (United Kingdom) OVE (Austria)
CEBEC (Belgium) SEMKO (Sweden)
DEMKO (Denmark) SETI (Finland)
EANSW (Australia) SEV (Switzerland)
IMQ (Italy) UTE (France)
KEMA (The Netherlands) VDE (Germany)
NEMKO (Norway)
2. The flexible cord must be of a HAR (harmonized) type
HO5VV-F 3-conductor cord with a minimum conductor size
of .03 square inches (1.0 square millimeters).
3. The cord must have a current capacity of at least 10 Amperes
and a nominal voltage rating of 100-125 or 220-250 VAC.
B-2 Power Cord Requirements