Troubleshooting guide

Factory Default Configurations
B-4
Reset to Power Up default
The power up state of the box for the following features can be
different from the factory default, when they are used along with the
DECFNVR command.
− LF / New Line
− CR / New Line Mode
− Character Set (G0 = GL)
− Character Set (G2 = GR)
− DECSNC (Number of Copies)
This also applies when the RIS and DECSTR reset commands are used.
Note: For more information about DECFNVR command, see
Chapter 2 - Configuring and Operating.