Troubleshooting guide

A-1
APPENDICESAPPENDICES
A
Specific Conversion Box Commands
General Rules
The specific conversion box commands (command_n) are introduced with
the introducer command DCS 58 ; 1i, and terminated by the String
Terminator ST.
The introducer and string terminator can be given in hex form as necessary.
Both methods are shown in the following table:
ASCII Hexadecimal value
DCS 58 ; 1i Command_n ST 90 35 38 3B 31 69 Command_n 9C
These commands can be sent from any text terminal editor.