Specifications

Chapter 4: Troubleshooting and General Procedures
4-11
Control Panel
Message
Error Log Information Printer Response Go to FIP
FAILURE: 920 Failure 920: Engine Cooling
Fan Stalled, System Shut
Down
1. Beep five times.
2. Save the # of pages
and Error XXX to the
error log.
3. Turn off the fuser.
6.2.20
FAILURE: 940
FUSER SYSTEM
Failure 940: Fuser System 1. Beep five times.
2. Save the # of pages
and Error XXX to the
error log.
3. Turn off the fuser.
6.2.3
Replace or
reseat
Fuser,
MCU
FAILURE: 900
901
MAIN MOTOR
Failure XXX: Main Motor 1. Beep five times.
2. Save the # of pages
and Error XXX to the
error log.
3. Turn off the fuser.
6.2.19
FAILURE: 930:
OPTICAL SYSTEM
Failure 930: Optical System 1. Beep five times.
2. Save the # of pages
and Error XXX to the
error log.
3. Turn off the fuser.
6.3.11,
6.3.4
FONT MODULE
FULL
NA 1. Beep once.
2. Resume normal
operation.
NA
LOAD paper size NA 1. Save current job.
2. Beep five times.
3. Save the current job
until the correct paper
size is inserted or a
time out occurs.
4. Resume normal
operation.
6.2.13
LOWER TRAY
EMPTY
NA 1. Save current job.
2. Beep five times.
3. Save the current job
until paper is inserted
4. Resume normal
operation.
6.2.11
LOWER TRAY OUT NA 1. Save current job.
2. Beep five times.
3. Save the current job
until the lower tray is
inserted
4. Resume normal
operation.
6.2.10