Specifications

Chapter 3: Using the Control Panel
3-31
The following table references control panel messages to the FRU FIPs or list the item to
replace.
Control Panel
Message
Error Log Information
Printer Response
Go to FIP
CHANGE
CARTRIDGE
NA
1. Save Current job.
2. Beep 5 times.
3. Hold job until
cartridge changes.
4. Resume normal
operation.
Replace
Toner
Cartridge.
6.2.12
CLOSE COVER NA
1. Save Current job.
2. Beep 5 times.
3. Hold job until
cartridge changes.
4. Resume normal
operation.
6.3.2
ERROR: 620
621
622
CACHE RAM
ERROR XXX: Cache RAM
failure, Cache disabled
1. Beep once.
2. Save the # of pages
and Error XXX to the
error log.
3. Disable the Cache
controller.
4. Resume normal
operation.
Replace
or reseat
controller.
ERROR: 608
EEPROM
Error 608: EEPROM did not
accept new data
1. Beep once.
2. Save the # of pages
and Error XXX to the
error log.
3. Use factory defaults
4. Resume normal
operation.
Replace
or reseat
controller
ERROR: 615
FONT MODULE
Error 615: Font Module did not
accept new data
1. Beep once.
2. Save the # of pages
and Error XXX to the
error log.
3. Resume normal
operation.
Replace
or reseat
Font
SIMM
ERROR: 609
HARDWARE CONFIG
Error 609: Hardware
Configuration Failure
1. Beep once.
2. Save the # of pages
and Error XXX to the
error log.
3. Resume normal
operation.
Replace
or reseat
controller
ERROR: 630
631
OPTION SLOT 0
Error XXX: Option Slot
Failure, Option Slot 0 Disabled
1. Beep once.
2. Save the # of pages
and Error XXX to the
error log.
3. Disable Option Slot 0.
4. Resume normal
operation.
Replace
or reseat
option