Specifications

Chapter 3: Using the Control Panel
3-22
Font Module
Description. Writing to the Font Module is unsuccessful.
ERROR: 615
FONT MODULE
The file to be written to the font module is not written, and operation continues.
Detection. Operating system unable to successfully write to the Font Module.
Printer Response.
1) Sound beeper 1 time.
2) Save the number of pages and the error code to the error log.
3) Normal operation.
Service Action Required: Replace the Font Module.If that doesn't work, replace the controller
Hardware Configuration
Description. The checksum for POST's EEPROM area is incorrect.
ERROR: 609
HARDWARE CONFIG
Operation is attempted, but output may not look correct if the POST data is corrupted.
Detection. By the Operating System.
Printer Response.
1) Sound beeper 1 time.
2) Save the number of pages and the error code to the error log.
3) Normal operation.
Service Action Required: Replace the controller
Option Slot 0
Description. The interface to Option Slot 0 fails.
ERROR: 630, 631
OPTION SLOT 0
The option in slot 0 is disabled and operation is attempted.
Detection. By the Operating System.
Printer Response.
1) Sound beeper 1 time.
2) Save the number of pages and the error code to the error log.
3) Disable option slot 0.
4) Normal operation.
Service Action Required: Replace controller to use option slot 0.