Specifications

Chapter 3: Using the Control Panel
3-20
Upper Tray Empty
Description The upper paper tray is detected as being empty. Normal operation does not
continue until the upper tray is replenished with paper. NOTE: This message only appears if an
auxiliary tray is installed on the unit.
Detection. By the Operating System.
Printer Response.
1) Save current job.
2) Sound beeper 5 times.
3) Hold present job until paper is replenished.
4) Normal operation.
Service Action Required.
None, but if the message does not go away after paper has been added, go to Section 6.2.11
Paper Cassette is Out of Paper and 6.3.10 No Paper Sensor Failure.
Upper Tray Out
Description The upper paper tray is detected as being out of the unit. Normal operation does not
continue until the upper tray is replaced. NOTE: This message only appears if an auxiliary tray is
installed on the unit.
Detection. By the Operating System.
Printer Response.
1) Save current job.
2) Sound beeper 5 times.
3) Hold present job until tray has been replaced.
4) Normal operation.
Service Action Required.
None, but if the message does not go away after paper tray has been added, go to Section
6.2.10
Paper Cassette is Not in Place and 6.3.13 Paper Size Switch Failure.