Specifications

Chapter 3: Using the Control Panel
3-19
Paper Jam>Tray
Description A paper jam occured at the paper tray. Normal operation does not continue until the
jammed paper is removed.
Detection. By the Operating System.
Printer Response.
1) Save current job.
2) Sound beeper 5 times.
3) Save the number of pages and the error code, 544, to the error log.
4) Hold present job until the paper path is cleared.
5) Reprint the jammed page.
6) Normal operation.
Service Action Required.
None, but if the message does not go away after paper has been added, go to Section 6.2.7
Paper Jam between Feeder and Registration Sensor.
Tray Empty
Description. The main paper tray is detected as being empty. Normal operation does not
continue until the main paper tray is replenished with paper. NOTE: This message only appears if
an auxiliary tray is
not installed on the unit.
Detection. By the Operating System.
Printer Response.
1) Save current job.
2) Sound beeper 5 times.
3) Hold present job until paper is replenished.
4) Normal operation.
Service Action Required.
None, but if the message does not go away after paper has been added, go to Section 6.2.11
Paper Cassette is Out of Paper and 6.3.10 No Paper Sensor Failure.
Tray Out
Description. The main paper tray is detected as being out of the unit. Normal operation does not
continue until the main paper tray is replaced. NOTE: This message only appears if an auxiliary
tray is
not installed on the unit.
Detection. By the Operating System.
Printer Response.
1) Save current job.
2) Sound beeper 5 times.
3) Hold present job until tray has been replaced.
4) Normal operation.
Service Action Required.
None, but if the message does not go away after paper tray has been added, go to Section
6.2.10
Paper Cassette is Not in Place and 6.3.13 Paper Size Switch Failure.