Specifications

Chapter 3: Using the Control Panel
3-18
No Paper Trays
Description Both the upper and lower paper trays are detected as being out of the unit. Normal
operation does not continue either of the trays is replaced. NOTE: This message only appears if
an auxiliary tray is
installed on the unit.
Detection. By the Operating System.
Printer Response.
1) Save current job.
2) Sound beeper 5 times.
3) Hold present job until either the upper or lower paper tray is installed.
4) Normal operation.
Service Action Required.
None, but if the message does not go away after paper trays have been added, go to Section
6.2.10
Paper Cassette Is Not in Place.
Paper Jam>Exit
Description. A paper jam occured at the exit. Normal operation does not continue until the
jammed paper is removed.
Detection. By the Operating System.
Printer Response.
1) Save current job.
2) Sound beeper 5 times.
3) Save the number of pages and the error code, 540, to the error log.
4) Hold present job until the paper path is cleared.
5) Reprint the jammed page (if /ExitJamRecovery is set to true).
6) Normal operation.
Service Action Required.
None, but If the message does not go away after paper has been cleared, go to Section 6.2.5
Paper Jam in Exit Area of Paper Path.
Paper Jam>Fuser
Description. A paper jam occured at the fuser. Normal operation does not continue until the
jammed paper is removed.
Detection. By the Operating System.
Printer Response.
1) Save current job.
2) Sound beeper 5 times.
3) Save the number of pages and the error code, 542, to the error log.
4) Hold present job until the paper path is cleared.
5) Reprint the jammed page.
6) Normal operation.
Service Action Required.
None, but If the message does not go away after paper has been cleared, go to Section 6.2.6
Paper Jam Between Registration Sensor and Exit Sensor.