Specifications

Chapter 3: Using the Control Panel
3-17
Manual <Paper Size>
Description The manual feed feature is selected over the multi-purpose feeder selection. If the
requested paper is not inserted into the multi-purpose feed and the <Select> button pressed for
each page prior to the Manual Feed Wait time-out, the job is flushed.
Detection. By the Operating System.
Printer Response.
1) Save current job.
2) Sound beeper 5 times.
3) Hold present job until correct paper is inserted into the manual feed tray and <Select> being
pressed, flush the job.
4) Normal operation.
Service Action Required.
None
Multi Tray Empty
Description The multi-purpose feeder paper tray is detected as being empty. Normal operation
does not continue until the lower tray is replenished with paper.
Detection. By the Operating System.
Printer Response. By the Operating System.
1) Save current job.
2) Sound beeper 5 times.
3) Hold present job until paper is replenished.
4) Normal operation.
Service Action Required.
None, but if the message does not go away after paper has been added, go to Section 6.3.9
MBF Sensor Failure.
Need Cartridge
Description. No cartridge is detected in the unit. Operation does not continue until a cartridge is
installed.
Detection. By the Operating System.
Printer Response.
1) Save current job.
2) Sound beeper 5 times.
3) Hold present job until cartridge is installed.
4) Normal operation.
Service Action Required.
None, but if the message does not go away after cartridge has been added, go to Section 6.2.8
Toner (EP) Cartridge is not in Place.