Specifications

Chapter 3: Using the Control Panel
3-15
Operational Error Modes
Overview
Operational error modes. arise during normal operation of the printer. A service call is
not
necessary. The system is unable to print any additional pages until the problem is resolved. Once
the problem is resolved, normal operation continues.
Change Cartridge
Description The "TONER LOW" warning appeared for 100 pages without being resolved.
Operation does not continue until the cartridge is replaced.
Detection. The toner sensor continues to indicate low toner throughout the 100 pages.
Printer Response.
1) Save current job.
2) Sound beeper 5 times.
3) Hold present job until cartridge is changed.
4) Normal operation.
Service Action Required.
None, but if the cartridge is replaced and the message does not go away, go to Section 6.2.12
Toner (EP) Cartridge Is Low on Toner.
Close Cover
Description. The cover is detected as being open. Operation does not continue until the cover
is closed.
Detection. By operating system.
Printer Response.
1) Save current job.
2) Sound beeper 5 times.
3) Hold present job until cover is closed.
4) Normal operation.
Service Action Required.
None, but if the cover is closed and the message does not go away go to Section 6.3.2.
LVPS
Assembly Failure.
Font Module Full
Description The Font Module is detected as being full.
Detection. The operating system determines that the PFM is full.
Printer Response.
1) Sound beeper 1 time.
2) Normal operation.
Service Action Required.
None, if the module is full, insert a new module or remove unwanted fonts.