Specifications

v
Laser Printer Safety Information
The following safety guidelines and information are provided to protect and inform you and ensure proper
and safe operation of the printer.
Do not modify or remove parts from the printer.
Do not block the air vent with paper or another object. If the printer is used in a small room for many
hours, be sure adequate ventilation is provided.
Do not place anything on the printer. Liquid spilled on the printer could affect insulation, and may
cause a hazardous situation.
Do not allow metal objects (such as paper clips or staples) to fall into the printer.
Do not open the printer cover during operation. This could cause a paper jam.
Do not turn the power off while the printer is printing.
Do not spray flammable substances near the printer.
If the printer does not operate normally when the instructions are followed, or if the printer exhibits a
distinct change in performance indicating a need for service, unplug the printer from the electrical
outlet. Contact your Authorized Digital Reseller or Service Provider.
Do not handle equipment if your hands are wet. In a nonemergency situation, if you must unplug the
printer, turn the power off first. Then disconnect the power plug from the electrical outlet by pulling on
the plug, not the power cord.
Do not deviate from the specifications outlined in this guide.
Be sure the power switch is off before inserting the power plug into an electrical outlet.
The printer complies with appropriate safety standards. With specific regard to the laser, this equipment
complies with laser product performance standards set by governmental agencies as a Class 1 laser
product. It does not emit hazardous light; the beam is totally enclosed during all modes of customer
operation and maintenance.