Specifications

Chapter 14: Removal and Replacement Procedures --- Electrical Modules
14-13
RRP 6.6 HVPS
Removal
1. Open the Rear Cover (RRP 1.1).
2. Remove all of the covers.
3. Remove the Fuser Assembly (RRP 4.1).
4. Remove the controller (ESS). (RRP 6.2)
5. Remove the ESS enclosure (RRP 6.1).
6. Remove the Interconnect PWB enclosure (with PWB)
7. Disconnect all P/Js on the HVPS.
8. Remove the five tapped 8mm gold screws securing the HVPS to the frame .
9. Remove the HVPS from the Electronics Box.
Replacement
1. Position the HVPS in the Electronics Box.
2. Reinstall the five tapped 8mm gold screws securing the HVPS to the Electronics Box.
3. Reconnect all P/Js on the HVPS (P/J 111, P/J CR, P/J DB, P/J TR, and P/J RTN).
4. Reinstall the Interconnect PWB enclosure (with PWB)
5. Reinstall the ESS enclosure.
6. Reinstall the controller (ESS).
7. Reinstall the Fuser Assembly.
8. Reinstall all covers.