Specifications

Chapter 11: Removal and Replacement Procedures --- Paper Transportation
11-35
RRP 3.17 Console Assembly
Removal
1. Remove the BTR Assembly (RRP 3.7).
2. Remove the Transportation Chute Assembly (RRP 3.8).
3. Remove the Inlet Chute Assembly (RRP 3.9).
4. Remove the Front Plate Assembly (RRP 3.11).
5. Unplug P/J 22 (LCD) and P/J 23 (keypad) from the Console Assembly.
NOTE: The Console Assembly wiring harness runs to P/J 50 on the MCU PWB.
6. Remove the six tapped 8mm gold screws securing the Console Assembly to the Front
Transport Assembly .
7. Remove the Console Assembly.
Replacement
1. Align the Console Assembly with the holes in the Front Transport Assembly.
2. Reinstall the six tapped 8mm gold screws securing the Console Assembly to the Front
Transport Assembly.
3. Plug P/J 22 (LCD) and P/J 23 (keypad) into the Console Assembly.
4. Replace the Front Plate Assembly.
5. Replace the Inlet Chute Assembly.
6. Replace the BTR.
7. Replace the Transport Chute Assembly.