Specifications

Chapter 11: Removal and Replacement Procedures --- Paper Transportation
11-23
RRP 3.11 Front Plate Assembly
Removal
1. Open the Front Transport Assembly.
2. Remove the BTR Assembly (RRP 3.7).
3. Remove the Transportation Chute Assembly (RRP 3.8).
4. Remove the Inlet Chute Assembly (RRP 3.9).
5. Remove the wire harness that runs across the bottom of the plate.
6. Remove the seven tapped 8mm gold screws securing the Front Plate Assembly (including
the control panel)to the Front Transport Assembly.
7. Remove the Front Plate Assembly.
CAUTION: Do not deform or stretch the Front Plate Assembly spring.
Replacement
1. Align the Front Plate Assembly with the holes in the Front Transport Assembly.
2. Reinstall the seven tapped 8mm gold screws securing the Front Plate Assembly to the Front
Transport Assembly.
NOTE: Be sure to replace the black wire secured by the top right screw.
3. Replace the wire harness that runs across the bottom of the plate.
4. Reinstall the Inlet Chute Assembly.
5. Reinstall the Transportation Chute Assembly.
6. Reinstall the BTR Assembly.