Specifications

Chapter 11: Removal and Replacement Procedures --- Paper Transportation
11-17
RRP 3.8 Transportation Chute Assembly
Removal
1. Open the Front Transport Assembly.
2. Remove the BTR Assembly (RRP 3.7).
3. Remove the two tapped 8mm gold screws that secure the Transportation Chute Assembly to
the Front Transport Assembly .
4. Use the blade of a screwdriver to spread the latches that secure the Transportation Chute to
the front cover. Lift the Transportation Chute Assembly away from the Front Transport
Assembly.
5. Turn the Transportation Chute Assembly over.
6. Unplug the red wire (P/J TR–T).
7. Remove the 8mm silver screw securing the green wire, and remove the green wire
Replacement
1. Reinstall the BTR Assembly.
2. Plug in the red wire (P/J TR–T) and secure the green wire with an 8mm silver screw.
3. Position the Transportation Chute Assembly against the Front Cover, aligning the latches at
the bottom of the Assembly with the latches on the Front Cover.
4. Press firmly on the Transportation Chute Assembly, until it snaps into place.
5. Secure the Transportation Chute Assembly with two tapped 8mm gold screws.