Specifications

Chapter 11: Removal and Replacement Procedures --- Paper Transportation
11-11
RRP 3.5 Take–Away Roll Assembly
Removal
1. Open the Front Transport Assembly.
2. Remove the Take–Away Roll Assembly from the Lower Chute Assembly .
Take the left end of the Take–Away Roll Assembly in your left hand and take the
right end of the Assembly in your right hand. Pull the Assembly up while pushing
the Lower Chute Assembly away from the Take–Away Roll. The Roll will pop out
of the positioning tabs.
Replacement
1. Align the bearings at the ends of the Take–Away Roll Assembly with the tabs in
the Lower Chute Assembly .
2. Press the Take–Away Roll Assembly bearings into the Lower Chute Assembly tabs.
3. Position the Lower Chute Assembly mylar strips so they ride on top of the Take–Away Roll
Assembly.