Specifications

Chapter 11: Removal and Replacement Procedures --- Paper Transportation
11-7
RRP 3.3 Gear Double R
Removal
1. Open the Front Transport Assembly.
2. Remove the C–Ring holding the Gear Double R to the shaft .
3. Remove the Gear Double R by biasing the Lower Chute Assembly toward the front of the
printer while you slide the gear off of the shaft.
Replacement
1. Reinstall the Gear Double R by biasing the Lower Chute Assembly toward the
front of the printer while you slide the gear onto the shaft .
2. Reinstall the C–Ring to secure the gear to the shaft.