Specifications

Chapter 9: Removal and Replacement Procedures --- Covers
9-5
RRP 1.2 Top Cover Assembly
Removal
1. Open the rear cover (RRP 1.1).
2. Remove the two 6mm silver screws located at the top rear of the Top
Cover Assembly.
3. Open the Front Transport Assembly.
4. Remove one 6-mm silver screw at the top of the top cover.
5. Gently lift up and remove the Top Cover
Replacement
1. Position the Top Cover so the plastic tabs on the Side Covers fit inside
the Top Cover.
2. Press the Top Cover down and into place. Secure the top cover with one
6-mm silver screw at the top of the top cover.
3. Secure the Top Cover with two 6mm silver screws at the top of the top
cover..