Specifications

Chapter 7: Using the Diagnostic Tool
7-19
DG 85 T CLUTCH LOWER
This Diagnostic code tests the Optional Feed Assembly Turn Solenoid.
To run DG 85:
1. Enter Diagnostics Mode.
2. Repeatedly press [2] until the LCD displays
DG 85.
3. Press [1] to start the test.
4. Verify that when you press [1], the Optional Feed Assembly Turn
Solenoid actuates.
CAUTION:
Quickly verify component operation, then exit DG 85.
Extended operation of DG 85 may damage the Optional Feed Assembly
Turn Solenoid.
5. To Exit DG 85, repeatedly press [2] to cycle the LCD to DG 00 Exit
Diagnostics.
6. Press [1] to exit DG 85.
DG 90 MOTOR MAIN
This Diagnostic code tests the Main Drive Motor.
WARNING: DG 90 switches on the Main Motor. Be careful around the Motor and Drive
Assembly.
To run DG 90:
1. Enter Diagnostics Mode.
2. Repeatedly press [2] until the LCD displays
DG 90.
3. Press [1] to start the test.
4. Verify that when you press [1], the Main Motor and Drive Assembly turn.
5. To Exit DG 90, repeatedly press [2] to cycle the LCD to
DG 00 Exit
Diagnostics
.
6. Press [1] to exit DG 90.