Specifications

Chapter 7: Using the Diagnostic Tool
7-17
DG 80 SOLENOID TRAY 0
This Diagnostic code tests the Pick Up Solenoid.
To run DG 80:
1. Enter Diagnostics Mode.
2. Repeatedly press [2] until the LCD displays
DG 80.
3. Press [1] to start the test.
4. Verify that when you press [1], the Pick Up Solenoid actuates.
5. To Exit DG 80, repeatedly press [2] to cycle the LCD to
DG 00 Exit
Diagnostics.
6. Press [1] to exit DG 80.
DG 81 SOLENOID TRAY 1
This Diagnostic code tests the Feed Solenoid.
To run DG 81:
1. Enter Diagnostics Mode.
2. Repeatedly press [2] until the LCD displays
DG 81.
3. Press [1] to start the test.
4. Verify that when you press [1], the Feed Solenoid actuates.
5. To Exit DG 81, repeatedly press [2] to cycle the LCD to
DG 00 Exit
Diagnostics.
6. Press [1] to exit DG 81.