Specifications

Chapter 7: Using the Diagnostic Tool
7-11
DG 30 PRINT COUNTER
This Diagnostic code displays the total number of prints produced by the printer. The total print
count is taken from the actuator signals sent to the feed solenoid. The total count icrements
even when the paper jams in the paper tray.
To Run DG 30:
1. Enter the Diagnostics Mode
The LCD displays the
Print Counter/Selecting DG 30 message. The printer is in Diagnostics
mode.
2. Press [1].
The LCD displays the print total. In the following example, the total print count is 000965:
PRINT COUNTER
000965 DG30
3. To exit DG30, press [2].