Specifications

Chapter 7: Using the Diagnostic Tool
7-9
Diagnostic Code Table
The following table lists the tasks you can perform with the Diagnostic Tool.
DG codes 80, 81, and 85 turn on solenoid for 500 msec (to avoid burnout).
To Display This... Enter This DG Code...
The LCD Displays...
Total number of test prints made 30
PRINT COUNTER
A sensor or switch 02
SENSOR CHECK
Fuser Temperature setting 07
FUSER TEMP SET
Actual temperature of the fuser 08
FUSER TEMP
Current switch combination on the Paper Size
Switches
00
SIZE SENSOR
ROM Checksum 00
CHECK SUM