Specifications

Chapter 7: Using the Diagnostic Tool
7-8
Diagnostics Mode
The Diagnostics Mode allows you to test various switches and sensors. Diagnostic mode also
displays the total number of prints the printer has produced.
Diagnostics Mode Options
• Total Print Count
• Input Test
• Output Tests
To Enter Diagnostics Mode
1. Hold down [1] and switch on printer Main Power.
2. Release [1].
The LCD displays the
Print Counter/Selecting DG message. The printer is in Diagnostics Mode.
The number after the DG is the diagnostic test currently selected. DG 30 is the default.
PRINT COUNTER
SELECTING DG30
NOTE: The printer will not enter Diagnostics Mode if Power-Up Sequence finds an error during
the ROM/RAM check.
To Exit Diagnostics Mode:
Press [2] repeatedly until the DG code 00 appears, then press [1] to exit the current diagnostic
mode.