Specifications

Chapter 6: FRU Replacement and Fault Isolation Procedures
6-105
6.4.13 Skewed image
PROBLEM
The printed image is not parallel with the sides of the page.
INITIAL ANALYSIS
Inspect the following components. Are they compatible with your printer version,
correctly installed, not damaged, deformed, or contaminated?
Toner Cartridge BTR Assembly
Paper Cassettes Transportation Chute Assembly
Feeder Assembly Inlet Chute Assembly
ROS Assembly Lower Chute Assembly
Front Tray Assembly Pick–Up Roll Assembly
Bottom Plate Assembly Optional Feeder Assembly
Inspect the printer paper path. Is it clear of foreign matter, such as staples, paper clips, and
paper scraps?
1. PAPER FEED
Are the Paper Cassettes installed correctly, and is the paper correctly loaded into the cassettes?
Yes No
Go to Step 2. Reload the paper and reinstall the cassettes.
2. Toner CARTRIDGE
Install a new Toner Cartridge.
Is the image still skewed?
Yes No
Go to Step 3. Problem solved.
3. PAPER PATH
Inspect the paper path, between the feed tray and the exit tray, for contamination
or obstructions.
Is the paper path free of obstructions?
Yes No
Go to Step 4. Remove obstructions or contamination from the paper path.
4. PAPER PATH ROLLS
Inspect the rolls along the paper path, between the feed tray and the exit tray, for contamination,
scratches, or damage.
Are the paper path rolls free of contamination, scratches, or damage?
Yes No
Return to Initial Analysis. Replace the damaged roll.