Specifications

Chapter 6: FRU Replacement and Fault Isolation Procedures
6-74
6.3.17 Drive Assembly failure Continued
8. TAKE–AWAY ROLL ASSEMBLY ANALYSIS
Disconnect P/J111 from the HVPS.
Remove the Take–Away Roll Assembly.
Hand rotate (counter-clockwise) the Drive Assembly transmission gear located directly above the
motor. (NEVER rotate the transmission gear clockwise.)
Does the gear on the Main Motor shaft rotate counterclockwise?
Yes No
Go to Step 9. Replace the Take–Away Roll Assembly.
9. TONER CARTRIDGE ANALYSIS
Disconnect P/J111 from the HVPS.
Remove the Toner Cartridge.
Hand rotate (counter-clockwise) the Drive Assembly transmission gear located directly above the
motor. (NEVER rotate the transmission gear clockwise).
Does the gear on the Main Motor shaft rotate counterclockwise?
Yes No
Go to Step 10. Replace the Toner Cartridge.
10. FUSER ASSEMBLY ANALYSIS
Disconnect P/J111 from the HVPS.
Remove the Fuser Assembly.
Hand rotate (counter-clockwise) the Drive Assembly transmission gear located directly above the
motor. (NEVER rotate the transmission gear clockwise).
Does the gear on the Main Motor shaft rotate counterclockwise?
Yes No
Replace the Drive Assembly. Replace the Fuser Assembly.