Specifications

Chapter 6: FRU Replacement and Fault Isolation Procedures
6-71
6.3.16 Turn Solenoid failure Continued
8. FEEDER PWB ANALYSIS
Disconnect P/J 115 on the Paper Feeder PWB.
Is there continuity (0
Ω)Ω)
between all pins on J115 and J116 on the Feeder PWB?
Yes No
Go to Step 9. Replace the Feeder PWB.
9. HARNESS ASSEMBLY OUT ANALYSIS
Disconnect P/J116 on the Paper Feeder PWB and P/J115 on the Tray 2 Paper Feeder PWB.
Is there continuity (0
Ω) Ω)
between all wires on P/J116 and P/J115?
Yes No
Go to Step 10. Replace the Harness Assembly OUT.
10. FEEDER PWB AUX ANALYSIS
Disconnect P/J 115 and P/J 202 on the Tray 2 Paper Feeder PWB.
Is there continuity (0
Ω) Ω)
between all pins on J115 and J202 on the AUX Feeder PWB?
Yes No
Replace the Feed Solenoid 2 of Feeder Assembly 2. Replace the Feeder PWB AUX.