Specifications

Chapter 6: FRU Replacement and Fault Isolation Procedures
6-32
6.2.15 Inoperative printer continued
13. FEED SOLENOID ON STANDARD FEEDER ASSEMBLY ANALYSIS
Unplug P/J 201 on the Standard Feeder PWB.
Is there continuity (0 ohms) between J201–1 and J201–2?
Yes No
Go to Step 14. Replace the Turn Solenoid on the Feeder Assembly.
14. TURN SOLENOID ON STANDARD FEEDER ASSEMBLY ANALYSIS
Unplug P/J 202 on the Standard Feeder PWB.
Is there is continuity (0 ohms) between J202–1 and J202–2?
Yes No
Replace the Standard Feeder PWB. Replace the Turn Solenoid on the Feeder Assembly.
15. ROS ASSEMBLY ANALYSIS
Unplug P/J19 from the MCU PWB.
Do the LCD and Fan function normally?
Yes No
Replace the ROS Assembly. Go to Step 16.
16. CONSOLE ASSEMBLY ANALYSIS
Disconnect P/J 20 on the MCU PWB.
Switch ON Main Power.
Does the Fan function normally?
Yes No
Replace the Console Assembly. Replace the MCU PWB