Specifications

Chapter 6: FRU Replacement and Fault Isolation Procedures
6-28
6.2.14 “Need Cartridge” Message Is Not Displayed:
Fault code J5 Continued
4. Toner (EP) CARTRIDGE ANALYSIS
1. Disconnect P/J 15.
2. Use Diagnostic Tool Test DG02 to check the Toner (EP) Cartridge.
3. Open the Front Transport Assembly and actuate the interlock switch.
4. Remove and reinstall the Toner (EP) Cartridge.
Does the CRU Switch function correctly and increment the DG02 number each time you
actuate it?
Yes No
Replace the MCU PWB. Replace the Toner (EP) Cartridge.