Specifications

Chapter 6: FRU Replacement and Fault Isolation Procedures
6-16
6.2.7 Paper Jam between Feeder and Reg. Sensor: Fault
code E2 continued
13. ROM DATA ANALYSIS
(Fault code E2 appears only when Legal 13" and 14" paper is used).
Make sure the paper guide is properly adjusted.
Does the parameter for DG00 SIZE SENSOR represent the paper size used in the Paper
Cassette?
Yes No
Go to Step 15. Go to Step 14.
14. ROM DATA ANALYSIS
(Fault code E2 appears only when Legal 13" and 14" paper is used).
Make sure the paper guide is properly adjusted.
Do the paper size switches of Feeder PWB or Feeder PWB AUX show the correct switch
combination for the paper size used in the cassette?
Yes No
Go to Section 6.3.13 Paper Size Switch Failure Replace the Paper Cassette.
15. PAPER CASSETTE ANALYSIS
Are the paper cassettes inserted in the printer and positioned correctly?
Yes No
Go to Step 16. Replace the Paper Cassette.
16. NO–PAPER ACTUATOR ANALYSIS
Does the No–Paper Actuator move freely, and not bind or stick?
Yes No
Go to Step 17. Reposition or replace the No–Paper Actuator.
17. NO–PAPER SENSOR ANALYSIS
Use Diagnostic Tool test DG02 to check the No–Paper Sensor.
Does the No–Paper Sensor function correctly and increment the DG02 number each time
you actuate it?
Yes No
Go to Step 18. Go to Section 6.3.10 No–Paper Sensor Failure.